Przegląd sprzętu 3com 3crwe725075a Wireless Lan Access Point 7250

Subskrybuj nasze sieci społecznościowe, aby być na bieżąco z najnowszymi aktualizacjami!

Komentarz

Hey, I appreciate your video, it's such high-quality work, but I wanna ask you something. Do you have any updates on this video? Is it stable over the year? And do you find any additional disadvantages of UAP AC? Thanks!

Great video; clear and concise. I have a few questions though: I have a similar setup to you with two POE hardwired locations for access points (AP) and I want to have the same SSIDs for my whole system with the same passwords. Do the Ubiquiti APs enable a seamless handoff to the other one? Specifically, if I'm getting a weak signal on my iPhone or tablet with one AP, will the AP switch to the stronger one? My understanding is that this is the benefit of having a "mesh" system vs. APs. Thanks!

Great vid, but would there be any downside to leaving the routing function turned on, on the original router? apart from potential channel overlap?

You mentioned the APs that included an injector could not be used with a PoE switch. That is incorrect. It depends on when the AP was made. I believe those from around 2016 or later can work with the injector or PoE switch.

Hi. I was wondering what the brand and model was for the switch you used in this video? Only see 2 videos on your blog for PoE switches and neither look like the switch used in this video. Also, what's your opinion of managed vs unmanaged switches? Thanks.

Greetings from the Mornington Peninsula in Victoria, Australia. I've been browsing videos for days now looking for EXACTLY what you have posted here. I bought two Ubiquiti AC-PRO WAPs (They didn't come with the pretty outer sleeve like yours, but inside they are the same, except mine came with PoE adapters) I plan on using Netgear 8 port switches that come with 4 X 802.3af powered ports anyway. One of my Netgear switches already powers two of my exterior security cameras. I will use one AC-PRO inside our house, ceiling mounted in a central location, and the other will serve my solid brick workshop/shed outside which already has an ethernet cable coming from my router inside the house. Previously I had used a six-year-old Linksys Velop Mesh to link all our devices in both buildings. That was struggling to get wireless link through so many solid brick walls from the house to the shed. Hopefully I will be able to apply similar configuration settings, as you did, to the two access points through the control software. I plan on switching my existing WiFi off on my gateway as you suggested. So thank you so much for this excellent post with so many specific details! I have liked and subscribed to your channel.

Can the Ubiquiti access points be wired into a Hikvision POE NVR?

I have a question, i installed 2 APnanoHd's with the unifi app.

thanks for posting, Q: Are you correct at

I am going to be setting up my home network here soon and had a question for you. You said at the end of the video that you are going to disable the wirless signal from the router and just use your WAP's. Did I hear that correctly? Should i somehow stop sending the wifi from the router and only use my two ubiquiti WAP's? Thanks for sharing this video. Helped tremendously.

I assume you connect the POE switch to the ethernet ports on your router. If you have multiple ethernet ports on your router, can you connect the WAPs directly from your router rather than using a POE switch? What's the purpose of the POE switch?

One Question: Does it make multiple networks if you have multiple ap's with the same SSID all on 5ghz?

new subscriber. I watched almost all your videos today....

Thanks for the video. Does the system require a ubiquiti controller? All I have is 2 ubiquiti access points and my modem/router.

Outstanding! I stumbled onto your channel because I’m building a house in St. John’s. Would love to pick your brain a little more. Cheers!

I know you would say it is a stupid question but do I need to connect my POE injector to the LAN/WAN port or one of the Ethernet ports or it doesn't matter?

Does it matter if you Wall mount or a Ceiling mount? I have a signal story home with WiFi Cameras out front and out back.

Dear I'm trying to connect 2 UAP Access point with one Router, 1 directly through router and 1 with HUB connect to Router will this work.

Can I rename my 2 new access points the same SSID as my modem/router combo? That was all 3 are same and I can move freely through out. Thanks

Thank you sir. I am planning to set up a Ubiquiti AP at home for the first time so wish me luck.

.

Zostaw komentarz

#0